- Out-of-Stock
UltraDish™ TP 550 Antennas (4 Pack)
Parabolic dish antennas with a TwistPort™ connector and an innovative mount.
Ship Charge Will Display As Free Until Ship Address / Location Is Provided To Calculate Ship Charge
Your Payments Are Securely Processed By PayPal Using SSL Technologies.
Please note! Ship charge will display as free until ship address / location is provided to calculat
High Gain Directional Antennas
UltraDish™ TP Antennas are high-gain directional parabolic antennas with a lossless TwistPort™ connector. The antennas are highly directional and have suppressed side lobes for ultimate performance.
Beam Performance
UltraDish™ TP antennas have suppressed side lobe radiation that reduces interference and enables installation in areas with high noise levels. The gain of UltraDish™ TP Antennas is achieved by focusing the signal delivered via the TwistPort™ waveguide.
Wideband 5.1 - 5.9 GHz
TwistPort Connector
TwistPort™ connector is a quick-locking virtually lossless waveguide port that connects the radio with the antenna. The TwistPort™ connector is our design and sets a new standard for outdoor wireless equipment in terms of performance, scalability, ease of use and deployment simplicity.
Easy Connection
TwistPort™ is the new definition of “easy”. By integrating the mechanical and the RF connection into the same structure, the connection of the radio to the antenna is brilliantly simple - “twist and lock” - and can be done with one hand!
Lossless
TwistPort™ connectors are virtually lossless: there are no coaxial RF connectors or RF cables that cause significant signal loss. In comparison to widely used coaxial cables and connectors, the loss on TwistPort™ is almost unmeasurable.
Cross-Platform Compatibility
UltraDish™ TP Antennas can be used with any radio with a TwistPort™ interface or with a variety of third-party radios connected through a TwistPort™ Adaptor.
Innovative Mount
UltraDish™ TP Antennas features a new innovative mounting system. The mount is separated from the antenna which makes the antenna installation and adjustment easy and quick.
Step 1: Bracket Installation
First install the bracket on the pole. Two sets of pole screws for different pole diameters are included.
The pole bracket is reversible: it can be mounted on the left or the right side of the antenna.
Step 2: Antenna Adjustment
Simply slide the antenna in the bracket and adjust the elevation and the azimuth. Tighten the screws to finish the installation.
Only one tool is needed for the entire installation.